Service & Downloads

Operating manuals
PDF-Documents for download

• LPX2 (german - 28KB)
• LPX2 (english - 23KB)
• Deepmax Series X3 (german - 2.1MB)
• Deepmax Series X3 with Data Logger (english - 4.25MB)
• Deepmax Series X5/X6 (englisch - 2,82MB)

You require "Adobe Acrobat Reader" for viewing PDF-files. Get it for free at adobe.com

Productpictures

• Picture DEEPMAX X6 - front view (JPG, RGB, 3086x2340 px, 1.8 MB)
• Picture DEEPMAX X6 - standard equipment (JPG, RGB, 6496x4872 px, 6.7 MB)

• Picture DEEPMAX X5 - Frontblende (JPG, RGB, 3981x2417 px, 2.2 MB)

• Picture 35cm single and double searchcoil (JPG, RGB, 6092x4165 px, 4.5 MB)

DEEPMAX X5 & X6 Series Firmware Updates

New firmware V1007 improvements:

• More accurate target identification with fast and slow signals.
• No more double signals for nearby metal objects in the DLOG mode.
• Manual ground balance in GND3 mode is improved.

Download "deepmax_firmware_update_x5_x6_1007.zip" here (<50KB).

To install new firmware proceed as follows:

• Download the new firmware as compressed ZIP-file from our website, unzip and copy the "DEEPMAXX.pro" file (don't rename) to a supplied USB-stick
• Connect the USB-stick with the DEEPMAX X5 or X6 detector,
  with X6 models use the additional GPS/ USB module
• Connect the battery to the DEEPMAX X5/6 and make sure that the detector is ON
• Watch the USB icon flashing slowly and wait for approximately 5 minutes
  until the display with all the icons comes on
• Turn OFF the unit with the power button
• Please note: Disconnect the USB-stick and delete or format the same with FAT with a computer afterwards !!!
• The DEEPMAX is now ready for use and can be turned on and off

Old detectors / Services
You need information about old LORENZ Detecting Systems Series? Please use our:
>> Online Contactform.

top